Large-strain deformation and strain partitioning in polyphase rocks: Dislocation creep of olivine–magnesiowüstite aggregates

Aggregates composed of olivine and magnesiowüstite have been deformed to large strains at high pressure and temperature to investigate stress and strain partitioning, phase segregation and possible localization of deformation in a polyphase material. Samples with 20 vol.% of natural olivine and 80 vol.% of (Mg_0.7Fe_0.3)O were synthesized and deformed in a gas-medium torsion apparatus at temperatures of 1127 °C and 1250 °C, a confining pressure of 300 MPa and constant angular displacement rates equivalent to constant shear strain rates of 1–3.3 × 10^− 4 s^− 1. The samples deformed homogeneously to total shear strains of up to γ  15. During constant strain rate measurements the flow stress remained approximately stable at 1250 °C while it progressively decreased after the initial yield stress at the lower temperature. Mechanical data, microstructures and textures indicate that both phases were deforming in the dislocation creep regime. The weaker component, magnesiowüstite, controlled the rheological behavior of the bulk material and accommodated most of the strain. Deformation and dynamic recrystallization lead to grain refinement and to textures that were not previously observed in pure magnesiowüstite and may have developed due to the presence of the second phase. At 1127 °C, olivine grains behaved as semi-rigid inclusions rotating in a viscous matrix. At 1250 °C, some olivine grains remained largely undeformed while deformation and recrystallization of other grains oriented for a-slip on (010) resulted in a weak foliation and a texture typical for pure dry olivine aggregates. Both a-slip and c-slip on (010) were activated in olivine even though the nominal stresses were up to 2 orders of magnitude lower than those needed to activate these slip systems in pure olivine at the same conditions.     

Melting and Sublimation of Planetary Ices Under Low Pressure Conditions: Laboratory Experiments with a Melting Probe Prototype

One possibility to explore the subsurface layers of icy bodies is to use a probe with a “hot tip", which is able to penetrate ice layers by melting. Such probes have been built and used in the past for the exploration of terrestrial polar ice sheets and may also become useful tools to explore other icy layers in the Solar System. Examples for such layers are the polar areas of Mars or the icy crust of Jupiter’s moon Europa. However, while on Earth a heated probe launched into an ice sheet always causes melting with subsequent refreezing, the behaviour of such a probe in a low pressure environment is quite different. We report on the results of some experiments with a simple “melting probe" prototype with two different kinds of hot tips in a vacuum environment. For one of the tips the probe moved into two types of ice samples: (i) compact water ice and (ii) porous water ice with a snow (firn) like texture. It was also found that the penetration behaviour was basically different for the two sample types even when the same kind of tip was used. While in the porous sample the ice was only subliming, the phase changes occurring during the interaction of the tip with the compact ice are much more complex. Here alternating phases of melting and sublimation occur. The absence of the liquid phase has severe consequences on the performance of a “melting probe" under vacuum conditions: In this environment we find a high thermal resistance between the probe surface and the underlying ice. Therefore, only a low percentage of the heat that is generated in the tip is used to melt or sublime the ice, the bulk of the power is transferred towards the rear end of the probe. This is particularly a problem in the initial phases of an ice penetration experiment, when the probe has not yet penetrated the ice over its whole length. In the compact ice sample, phases could be observed, where a high enough gas pressure had built up locally underneath the probe, so that melting becomes possible. Only during these melting periods the thermal contact between the probe and the ice is good and in consequence the melting probe works effectively.     

Isotopic evidence (Sr/Sr, δLi) for alteration of the oceanic crust at deep-rooted mud volcanoes in the Gulf of Cadiz, NE Atlantic Ocean

The chemical and isotopic composition of pore fluids is presented for five deep-rooted mud volcanoes aligned on a transect across the Gulf of Cadiz continental margin at water depths between 350 and 3860 m. Generally decreasing interstitial Li concentrations and ⁸⁷Sr/⁸⁶Sr ratios with increasing distance from shore are attributed to systematically changing fluid sources across the continental margin. Although highest Li concentrations at the near-shore mud volcanoes coincide with high salinities derived from dissolution of halite and late-stage evaporites, clayey, terrigenous sediments are identified as the ultimate Li source to all pore fluids investigated. Light δ⁷Li values, partly close to those of hydrothermal vent fluids (δ⁷Li: +11.9‰), indicate that Li has been mobilized during high-temperature fluid/sediment or fluid/rock interactions in the deep sub-surface. Intense leaching of terrigenous clay has led to radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.7106) in pore fluids of the near-shore mud volcanoes. In contrast, non-radiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.7075) at the distal locations are attributed to admixing of a basement-derived fluid component, carrying an isotopic signature from interaction with the basaltic crust. This inference is substantiated by temperature constraints from Li isotope equilibrium calculations suggesting exchange processes at particularly high temperatures (>200 °C) for the least radiogenic pore fluids of the most distal location.Advective pore fluids in the off-shore reaches of the Gulf of Cadiz are influenced by successive exchange processes with both oceanic crust and terrigenous, fine-grained sediments, resulting in a chemical and isotopic signature similar to that of fluids in near-shore ridge flank hydrothermal systems. This suggests that deep-rooted mud volcanoes in the Gulf of Cadiz represent a fluid pathway intermediate between mid-ocean ridge hydrothermal vent and shallow, marginal cold seep. Due to the thicker sediment coverage and slower fluid advection rates, the overall geochemical signature is shifted towards the sediment-diagenetic signal compared to ridge flank hydrothermal environments.     

Modelling of sediment supply from torrent catchments in the Western Alps using the sediment contributing area (SCA) approach

The production of coarse sediment in mountain landscapes depends mainly on the type and activity of geomorphic processes and topographic and natural conditions (e.g. vegetation cover) of these catchments. The supply of sediment from these slopes to mountain streams and its subsequent transport lead to sediment connectivity, which describes the integrated coupled state of these systems. Studies from the Northern Calcareous Alps show that the size of the sediment contributing area (SCA), a subset of the drainage area that effectively delivers sediment to the channel network, can be used as a predictor of sediment delivery to mountain streams. The SCA concept is delineated on a digital elevation model (DEM) using a set of rules related to the steepness and length of slopes directly adjacent to the channel network, the gradient of the latter and the vegetation cover. The present study investigates the applicability of this concept to the Western Alps to identify geomorphologically active areas and to estimate mean annual sediment yield (SY) in mainly debris-flow-prone catchments. We use a statistical approach that shows a parameter optimisation and a linear regression of SY on SCA extent. We use a dataset of ~25 years of assessed coarse sediment accumulation in 35 sediment retention basins. In the investigated catchments, sediment transport is governed by several factors, mainly by the extent of vegetation-free areas with a minimum slope of 23° that is coupled to the channel network with a very low gradient of the latter. With our improved framework, we can show that the SCA approach can be applied to catchments that are widely distributed, in a large spatial scale (hectare area) and very heterogeneous in their properties. In general, the investigated catchments show high connectivity, resulting in significant correlations between long-term average yield and the size of the SCA.     

Valence state partitioning of V between pyroxene‐melt: Effects of pyroxene and melt composition,and direct determination of V valence states by XANES. Application to Martian basalt QUE 94201 composition

Abstract— Experiments on a Martian basalt composition show that D_v augite/melt is greater than D_v pigeonite/melt in samples equilibrated under the same fO₂ conditions. This increase is due to the increased availability of elements for coupled substitution with the V³⁺ or V⁴⁺ ions, namely A1 and Na. For this bulk composition, both A1 and Na are higher in concentration in augite compared with pigeonite; therefore more V can enter augite than pigeonite. Direct valence state determination by XANES shows that the V³⁺ and V⁴⁺ are the main V species in the melt at fO₂ conditions of IW‐1 to IW+3.5, whereas pyroxene grains at IW‐1, IW, and IW+1 contain mostly V³⁺. This confirms the idea that V³⁺ is more compatible in pyroxene than V⁴⁺. The XANES data also indicates that a small percentage of V²⁺ may exist in melt and pyroxene at IW‐1. The similar valence of V in glass and pyroxene at IW‐1 suggests that V²⁺ and V³⁺ may have similar compatibilities in pyroxene.     

Cartograms for Use in Forecasting Weather-Driven Natural Hazards

This paper evaluates the potential of using cartograms for visualizing and interpreting forecasts of weather-driven natural hazards in the context of global weather forecasting and early warning systems. The use of cartograms is intended to supplement traditional cartographic representations of the hazards in order to highlight the severity of an upcoming event. Cartogrammetric transformations are applied to forecasts of floods, heatwaves, windstorms and snowstorms taken from the European Centre for Medium-range Weather Forecasts (ECMWF) forecast archive. Key cartogram design principles in standard weather forecast visualization are tested. Optimal cartogram transformation is found to be dependent on geographical features (such as coastlines) and forecast features (such as snowstorm intensity). For highly spatially autocorrelated weather variables used in analysing several upcoming natural hazards such as 2m temperature anomaly, the visualization of the distortion provides a promising addition to standard forecast visualizations for highlighting upcoming weather-driven natural hazards.     

Partially Fused Granite Blocks from Mt. Elephant, Victoria, Australia

Petrological and chemical evidence is presented to show thatsmall patches of brown glass found in blocks of granite eruptedin basaltic scoria at Mt. Elephant are the result of the partialfusion of biotite and quartz. The glass has moderate SiO₂ (63–66per cent), high AI₂O₃ (17.5–19 per cent), high FeO (3.8–5.2per cent) and very high K₂O (7.0–7.8 per cent) relativeto Na₂O (3.3–3.7 per cent) and is similar in compositionto many high K alkali syenites and trachytes.     

Learning from CDM SD tool experience for Article 6.4 of the Paris Agreement

The Paris Agreement (PA) emphasizes the intrinsic relationship between climate change and sustainable development (SD) and welcomes the 2030 agenda for the global Sustainable Development Goals (SDGs). Yet, there is a lack of assessment approaches to ensure that climate and development goals are achieved in an integrated fashion and trade-offs avoided. Article 6.4 of the PA introduces a new Sustainable Mitigation Mechanism (SMM) with the dual aim to contribute to the mitigation of greenhouse gas emissions and foster SD. The Kyoto Protocol’s Clean Development Mechanism (CDM) has a similar objective and in 2014, the CDM SD tool was launched by the Executive Board of the CDM to highlight the SD benefits of CDM activities. This article analyses the usefulness of the CDM SD tool for stakeholders and compares the SD tool’s SD reporting requirements against other flexible mechanisms and multilateral standards to provide recommendations for improvement. A key conclusion is that the Paris Agreement’s SMM has a stronger political mandate than the CDM to measure that SD impacts are ‘real, measurable and long-term’. Recommendations for an improved CDM SD tool are a relevant starting point to develop rules, modalities, and procedures for SD assessment in Article 6.4 as well as for other cooperative mitigation approaches.

POLICY RELEVANCE

Research findings are relevant for developing the rulebook of modalities and procedures for Article 6.4 of the Paris Agreement, which introduces a new mechanism for mitigation of greenhouse gas emissions and sustainable development. Lessons learnt from the CDM SD tool and recommendations for enhanced SD assessment are discussed in context of Article 6 cooperative approaches, and make a timely contribution to inform negotiations on the rulebook agreed by the Conference of the Parties serving as the Meeting of the Parties to the Paris Agreement.     

广西大瑶山地区加里东期石英脉型金矿：上木水金矿白云母Ar-Ar年龄约束

石英脉型金矿是广西大瑶山地区主要的金矿床类型之一,但一直没有高精度的年龄数据约束其成矿时代。论文首次 对大瑶山南部广西苍梧县上木水石英脉型金矿中的热液白云母进行39Ar/40Ar年龄法测年,获得坪年龄为（432.6 ± 3.2）Ma,相应 的等时线年龄为（428.2 ± 7.2）Ma,反等时线年龄为（425.3 ± 6.6）Ma,表明其成矿时代为加里东期。这一数据进一步证明 大瑶山南部的古龙-夏郢环形成矿区主要以加里东期矿化为主,除了与加里东期岩浆岩有关的斑岩-矽卡岩型钨多金属矿化 外,还存在石英脉型金矿。同时,位于大瑶山中部沿区域性大黎断裂分布的六岑-桃花-古袍金矿田的石英脉型金矿时代仍 然不明确,还需要进一步的高精度测年数据来约束。     

2009年冬季南海北部浮游植物粒度分级生物量和初级生产力

2009年2月在南海北部海域现场观测粒度分级叶绿素a质量浓度和初级生产力(PP)的分布。结果表明,调查海域水柱平均叶绿素a质量浓度的变化范围为0.11～8.37 mg/m³,平均为(1.28±2.23) mg/m³,高值区出现在珠江口及近岸海域;初级生产力的范围为344.8～1 222.5 mgC/(m²·d),平均为(784.2±351.4) mgC/(m²·d),高值区位于近岸及陆架海域。浮游植物粒度分级测定结果表明,在生物量较高的近岸海域,叶绿素a的粒级结构以小型浮游植物占优势,其贡献率为40.9%,微型和微微型浮游植物对总叶绿素a的贡献率分别为34.6%和24.5%;而在生物量较低的陆坡和开阔海域,各粒级浮游植物对叶绿素a的贡献率由大到小依次为微微型浮游植物(78.9%),微型浮游植物(17.2%)和小型浮游植物(3.9%)。相关性分析结果表明,调查海域分级叶绿素a的区域化分布特征与洋流运动下营养盐的分布密切相关,同时叶绿素a又高度影响着此区域PP的分布。此外,我们将调查海域实测所得浮游植物最佳光合作用速率与采用垂向归一化初级生产力模型估算的数据进行对比,发现后者明显低于前者,这说明通过水温估算最佳光合作用速率的算法在冬季南海北部可能存在低估。